Aston - Stainless Steel Heated Towel Rail - H1200mm x W600mm - Straight

Your chosen heating system:

Gas boiler installed after
2005
or
Oil boiler installed after
2007

Change my chosen system

We've displayed the most appropriate heat output below to adequately heat your room:

Watts:

BTUs:

What are Watts & BTUs?

The heat outputs have been measured at Delta Δ50*.

What is a Delta (Δ) Rating?

*The Delta rating for your chosen heating system as recommended by Building Regulations

Main Features:

What tends to put homeowners off purchasing a stainless-steel towel radiator is the slightly higher price tag, compared to the common steel towel rail. But in certain circumstances, stainless steel is definitely worth the investment. Bathroom towel rails are going to come into contact with water from wet towels and hands as well as general moisture from the steam of your toasty hot shower. Stainless steel is a material that is designed to withstand these corrosive elements for years and years – just take a look in your cutlery drawer! If your bathroom is poorly ventilated – lacking in windows and fans to remove moisture - or you have a rare and unusual set up, where the hot water flowing through your radiators is also used as hot water for your taps and showers, then we recommend a stainless steel towel rail to help you fight corrosion for years to come, with the long guarantee length providing extra peace of mind.

The straight ladder towel rail has been a firm favourite for many years in the bathroom radiator world. The ladder name signifies the run of horizontal tubes connected by two vertical tubes (these are called collectors). “Straight” – sometimes known as flat, simply means that the horizontals bars run straight across between collectors and when looking at the towel rail from the side, it is completely flat. So, they are great for compact bathrooms where every millimetre counts

This stainless steel material has a polished finish, much like chrome. The reflective, mirror finish makes it a popular choice for bathrooms. It adds a touch of shine and sparkle in the room and can mesh with your chrome fixtures perfectly.

This central heating/hot water towel rail is one that is plumbed into your homes central heating system. Whether you have a Combi boiler, gravity fed (conventional) system or a system with a cylinder, you can install this heated towel rail.

This towel rail has G1/2” connections at the base of either side of the towel rail and so the valves required will depend on your pipework (which is why they aren’t provided with the towel rail):

• For pipework coming from the wall to the bottom of the rail, use angled or corner valves (angled, for a valve head that sticks out into the room and corner for a valve head that’s tucked under the rail).
• For pipework coming from the floor and up to the bottom of the rail, use straight valves.

There are a few different types of valves available for you to choose from: Manual Valves provide easy on/off control – simply turn the valve by hand to allow the water from your central heating to pass through into the radiator or towel rail, just like a tap! These are commonly used with towel rails because of their ease, but that doesn’t mean you have to choose manual – unless your main boiler thermostat is located in your bathroom, which is unlikely.
Thermostatic Valves provide multi temperature control of the radiators in your home – saving energy and money! These valves have sensor mechanisms inside that shut off the flow of hot water to the radiator when the room temperature reached the desired level!

All of our towel rails are supplied with everything required to hang the rail on the wall (brackets & masonry fixings) as well as a chrome bleed valve and blanking plug for the top of the rail. For ultimate style we recommend you also purchase some colour matching pipe covers, either match the colour to the towel rail or the valves!