UKRadiators - Free delivery on all ordersFree delivery on all orders
UKRadiators - Limitless, free returnsLimitless, free returns
UKRadiators - Radiators from £19Radiators from £19
UKRadiators - Buy now, pay later with KlarnaBuy now, pay later with Klarna
Spring Sale now on. SAVE 10% off everything!
Terma

Retro - Brass Towel Radiators - H800mm x W504mm

Product Code: 21085
£471.60 Was £524
In Stock
Free delivery in 1-3 working days

Deliveries to Northern Ireland, Highlands and Islands may take a little longer to arrive.
SKU
WGRE1080050-BB

Product Information

Your chosen heating system:

Gas boiler installed after
2005
or
Oil boiler installed after
2007

We've displayed the most appropriate heat output below to adequately heat your room:

Watts:

BTUs:

What are Watts & BTUs?

The heat outputs have been measured at Delta Δ50*.

What is a Delta (Δ) Rating?

*The Delta rating for your chosen heating system as recommended by Building Regulations

Main Features:

BTUS
  • Δ30: 389 / Δ40: 536 / Δ50: 717
WATTS
  • Δ30: 114 / Δ40: 161 / Δ50: 210
What are Watts & BTUs?
What is a Delta (Δ) Rating?


  • Guarantee: 8 Years
  • Brackets, Masonry Fixings, Bleed Valve & Blanking Plug Included
  • Colour: Brass
  • Finish: Brushed
  • Heat Source: Central Heated/Hot Water
Terma manufactures its heated towel rails to the highest quality standards and this period style Retro is no exception. Features chunky cylindrical bars with traditional style ball joints on the end of each bar. The brackets on the Retro are located on the rear of the 4 corners making an very unobtrusive design The Brushed Brass colour from Terma has a matt, smooth texture. Retro can also be fitted as dual fuel - whereby it can run on the central heating in the winter and as electric in the summer. You simply need a Terma heating element and the Terma Integrated Valve with Immersion Tube (no T piece required with this valve) to easily install as dual fuel (800h = 200w, 1170h = 300w element)
*These electric heating elements must be installed by a registered competent electrician. Any faults developed due to incorrect installation will not be covered under the product warranty. The suggested fuse size is calculated based on a 230V supply and whilst 230V is the nominal voltage given to homes in the UK, the actual voltage supply can vary. The registered competent electrician carrying out the installation will determine the appropriate size of fuse to use for the installation.
More Information
SKU WGRE1080050-BB
Brand/Manufacturer Terma
Collection Retro
Colour Brass
Finish Brushed
Material Steel
Dry Mass (kg) 10 kg
Height 800.00 mm
Width 504.00 mm
Projection 102.00 mm
Pipe Centres 450mm
Wall to Pipe Centres 39mm - 49mm
Number of Tubes 5
BTUs (T30) 389.00 BTUs
BTUs (T40) 536.00 BTUs
BTUs (T50) 717.00 BTUs
Watts (T30) 114.00 Watts
Watts (T40) 161.00 Watts
Watts (T50) 210.00 Watts
Heat Source Central Heated/Hot Water
Connection Size/Type 1/2" BSP
Style Round Tube
Supplied With Brackets, Masonry Fixings, Bleed Valve & Blanking Plug Included
Radiator Valves Included No
Product Assurances CE Marked, BS EN 442 Certified, 8 Years Guarantee
GTIN 5901804676529
Guarantee Length 8 Years
Terma manufactures its heated towel rails to the highest quality standards and this period style Retro is no exception. Features chunky cylindrical bars with traditional style ball joints on the end of each bar. The brackets on the Retro are located on the rear of the 4 corners making an very unobtrusive design The Brushed Brass colour from Terma has a matt, smooth texture. Retro can also be fitted as dual fuel - whereby it can run on the central heating in the winter and as electric in the summer. You simply need a Terma heating element and the Terma Integrated Valve with Immersion Tube (no T piece required with this valve) to easily install as dual fuel (800h = 200w, 1170h = 300w element)
*These electric heating elements must be installed by a registered competent electrician. Any faults developed due to incorrect installation will not be covered under the product warranty. The suggested fuse size is calculated based on a 230V supply and whilst 230V is the nominal voltage given to homes in the UK, the actual voltage supply can vary. The registered competent electrician carrying out the installation will determine the appropriate size of fuse to use for the installation.

No Reviews