Zennor - Anthracite Electric Towel Rail H800mm x W600mm Straight 300w Thermostatic
Product Information
Main Features:
- 300W
- Guarantee: 15 Years (Towel Rail), 2 Years (Element)
- Electric Element Kit, Brackets, Fixings, Bleed Valve & Blanking Plugs Included
- Colour: Anthracite
- Finish: Matt
- Heat Source: Electric
The Element
The Talus digital element gives you flexibility and control over your heating system. The thermostatic heating system allows the radiator temperature range to be selected from 40-65 degrees, in 5 degree increments. The LED lights indicate the temperature setting, for at-a-glance checking.
Operation:When set to Comfort mode, the thermostat keeps the internal temperature of the radiator or towel rail at the value set by you (using the + and – buttons). Boost mode can be used to increase the element to the maximum temperature for a period of 2 hours (not exceeding 65°C), at the end of the Boost the element returns to Comfort mode.
There are also 2 different Timer modes: 12 hour and 24 hour. When set to these modes, the element will use Boost for 2 hours, then return to Comfort mode for either 10 or 22 hours – depending on your selection – after this time, the element will use Boost again. This sequence is repeated endlessly. The final operation mode is Standby/Antifreeze. In this mode the element will not operate (meaning it won’t provide any heat to the radiator or towel rail) unless the temperature drops below 10°C, where it will use the antifreeze mode to activate the element in order to prevent any internal liquid from freezing.
Full Installation Instructions and User Guide will be provided with the element.
| SKU | ZEN-80600SA-THE |
|---|---|
| Brand/Manufacturer | UK Radiators |
| Collection | Zennor |
| Colour | Anthracite |
| Finish | Matt |
| RAL Code | 7016 |
| Material | Steel |
| Dry Mass (kg) | 8.5 kg |
| Height | 800.00 mm |
| Width | 600.00 mm |
| Projection | 91.50 mm |
| Projection | 0 - 60mm |
| Number of Tubes | 14 |
| Tube Diameter | 22mm |
| Element Output | 300.00 |
| Control Type | Built-In Programmable Thermostat |
| Heating Element Type | Multi-Function, Class 1/2 Insulated |
| Operating Temperature | 40°C - 60°C; 10°C Antifreeze Protection |
| Operating Modes | Comfort, Boost/Dryer, Standby w/Antifreeze, Timer |
| Maximum Operating Temperature (°C) | 40°C - 60°C; 10°C Antifreeze Protection |
| Heat Source | Electric |
| Power Supply | 220V-240V Fused Spur |
| IP Rating | IP44 |
| Style | Straight Ladder |
| Supplied With | Electric Element Kit, Brackets, Fixings, Bleed Valve & Blanking Plugs Included |
| Radiator Valves Included | No |
| Assembly Required | Unfilled - Some minor assembly required |
| Product Assurances | CE Marked, BS EN 442 Certified, 15 Years (Towel Rail), 2 Years (Element) Guarantee |
| Guarantee Length | 15 Years (Towel Rail), 2 Years (Element) |
The Element
The Talus digital element gives you flexibility and control over your heating system. The thermostatic heating system allows the radiator temperature range to be selected from 40-65 degrees, in 5 degree increments. The LED lights indicate the temperature setting, for at-a-glance checking.
Operation:When set to Comfort mode, the thermostat keeps the internal temperature of the radiator or towel rail at the value set by you (using the + and – buttons). Boost mode can be used to increase the element to the maximum temperature for a period of 2 hours (not exceeding 65°C), at the end of the Boost the element returns to Comfort mode.
There are also 2 different Timer modes: 12 hour and 24 hour. When set to these modes, the element will use Boost for 2 hours, then return to Comfort mode for either 10 or 22 hours – depending on your selection – after this time, the element will use Boost again. This sequence is repeated endlessly. The final operation mode is Standby/Antifreeze. In this mode the element will not operate (meaning it won’t provide any heat to the radiator or towel rail) unless the temperature drops below 10°C, where it will use the antifreeze mode to activate the element in order to prevent any internal liquid from freezing.
Full Installation Instructions and User Guide will be provided with the element.
