UKRadiators - Free delivery on all ordersFree delivery on all orders
UKRadiators - Limitless, free returnsLimitless, free returns
UKRadiators - Radiators from £19Radiators from £19
UKRadiators - Buy now, pay later with KlarnaBuy now, pay later with Klarna
Spring Sale now on. SAVE 10% off everything!
Terma

Warp S - Salt & Pepper Towel Radiators - H655mm x W500mm

Product Code: 45830
£202.50 Was £225
Only 2 left in stock
Free delivery in 1-3 working days

Deliveries to Northern Ireland, Highlands and Islands may take a little longer to arrive.
SKU
WGWAS065050-SP

Product Information

Your chosen heating system:

Gas boiler installed after
2005
or
Oil boiler installed after
2007

We've displayed the most appropriate heat output below to adequately heat your room:

Watts:

BTUs:

What are Watts & BTUs?

The heat outputs have been measured at Delta Δ50*.

What is a Delta (Δ) Rating?

*The Delta rating for your chosen heating system as recommended by Building Regulations

Main Features:

BTUS
  • Δ30: 819 / Δ40: 1148 / Δ50: 1535
WATTS
  • Δ30: 240 / Δ40: 342 / Δ50: 450
What are Watts & BTUs?
What is a Delta (Δ) Rating?


  • Guarantee: 8 Years
  • Brackets, Masonry Fixings, Bleed Valve & Blanking Plug Included
  • Colour: Salt & Pepper
  • Finish: Matt
  • Heat Source: Central Heated/Hot Water
Terma has invested in pipe bending technology which allows it to produce heated towel rails such as the Warp S. Warp S is designed with large flat bars which sweep forward and then bend backwards on themselves to create a towel rail which is only mounted to the wall on one side, leaving the other side open and free for easily hanging towels on. Warp S can be mounted either way up as it has symmerical bars top and bottom, so the horizontal bars can reach out to the left or right hand side as you prefer. Think about where the towel rail will be placed in your bathroom in relation to the walls and which side of the towel rail provides easier access. Warp S has a very free floating effect as there are minimal brackets on show and it is free from obstruction for hanging the towels. Warp S has a large surface area in comparison to lots of standard ladder type rails - this means you get a higher heat output and additionally the colour stands out a lot more as a feature in the bathroom, on this basis Terma offer the Warp models in a range of very eye catching colours. Warp S can also be fitted as dual fuel - whereby it can run on the central heating in the winter and as electric in the summer. You simply need a Terma heating element and the Terma Integrated Valve with Immersion Tube (no T piece required with this valve) to easily install as dual fuel (1110h = 800w, 655h = 400w element) The Salt n Pepper colour from Terma has a matt, rough texture. Terma offers a 150x50mm colour chip of this finish should you wish to see the colour prior to purchase. Warp S features 50mm pipe connections so we suggest matching this with a 50mm H block valve which will provide a neat finish.
*These electric heating elements must be installed by a registered competent electrician. Any faults developed due to incorrect installation will not be covered under the product warranty. The suggested fuse size is calculated based on a 230V supply and whilst 230V is the nominal voltage given to homes in the UK, the actual voltage supply can vary. The registered competent electrician carrying out the installation will determine the appropriate size of fuse to use for the installation.
More Information
SKU WGWAS065050-SP
Brand/Manufacturer Terma
Collection Warp S
Colour Salt & Pepper
Finish Matt
Material Steel
Dry Mass (kg) 12 kg
Height 655.00 mm
Width 500.00 mm
Depth 70.00 mm
Projection 112.00 mm
Pipe Centres 50mm
Wall to Pipe Centres 57mm - 65mm
Number of Tubes 8
BTUs (T30) 819.00 BTUs
BTUs (T40) 1,148.00 BTUs
BTUs (T50) 1,535.00 BTUs
Watts (T30) 240.00 Watts
Watts (T40) 342.00 Watts
Watts (T50) 450.00 Watts
Heat Source Central Heated/Hot Water
Style Flat Tube
Supplied With Brackets, Masonry Fixings, Bleed Valve & Blanking Plug Included
Product Assurances CE Marked, BS EN 442 Certified, 8 Years Guarantee
GTIN 5901804261664
Guarantee Length 8 Years
Terma has invested in pipe bending technology which allows it to produce heated towel rails such as the Warp S. Warp S is designed with large flat bars which sweep forward and then bend backwards on themselves to create a towel rail which is only mounted to the wall on one side, leaving the other side open and free for easily hanging towels on. Warp S can be mounted either way up as it has symmerical bars top and bottom, so the horizontal bars can reach out to the left or right hand side as you prefer. Think about where the towel rail will be placed in your bathroom in relation to the walls and which side of the towel rail provides easier access. Warp S has a very free floating effect as there are minimal brackets on show and it is free from obstruction for hanging the towels. Warp S has a large surface area in comparison to lots of standard ladder type rails - this means you get a higher heat output and additionally the colour stands out a lot more as a feature in the bathroom, on this basis Terma offer the Warp models in a range of very eye catching colours. Warp S can also be fitted as dual fuel - whereby it can run on the central heating in the winter and as electric in the summer. You simply need a Terma heating element and the Terma Integrated Valve with Immersion Tube (no T piece required with this valve) to easily install as dual fuel (1110h = 800w, 655h = 400w element) The Salt n Pepper colour from Terma has a matt, rough texture. Terma offers a 150x50mm colour chip of this finish should you wish to see the colour prior to purchase. Warp S features 50mm pipe connections so we suggest matching this with a 50mm H block valve which will provide a neat finish.
*These electric heating elements must be installed by a registered competent electrician. Any faults developed due to incorrect installation will not be covered under the product warranty. The suggested fuse size is calculated based on a 230V supply and whilst 230V is the nominal voltage given to homes in the UK, the actual voltage supply can vary. The registered competent electrician carrying out the installation will determine the appropriate size of fuse to use for the installation.

No Reviews